Bookmark and Share
BioAssay: AID 624499

Counterscreen for agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A): Luminescence-based cell-based high throughput dose response assay to identify agonists of the mu 1 opioid receptor (OPRM1)

Name: Counterscreen for agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A): Luminescence-based cell-based high throughput dose response assay to identify agonists of the mu 1 opioid receptor (OPRM1). ..more
_
   
 Tested Compounds
 Tested Compounds
All(237)
 
 
Inactive(237)
 
 
 Tested Substances
 Tested Substances
All(238)
 
 
Inactive(238)
 
 
AID: 624499
Data Source: The Scripps Research Institute Molecular Screening Center (OPRM1_ACT_LUMI_1536_3XEC50 DCSRUN (HTR2A))
BioAssay Type: Confirmatory, Concentration-Response Relationship Observed
Depositor Category: NIH Molecular Libraries Probe Production Network
Deposit Date: 2012-08-17

Data Table ( Complete ):           All
Target
Tested Compounds:
Depositor Specified Assays
AIDNameTypeComment
624203Summary of the probe development efforts to identify agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A)summarySummary (HTR2A activators)
624169Luminescence-based cell-based primary high throughput screening assay to identify agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A)screeningPrimary screen (HTR2A activators in singlicate)
624381Luminescence-based cell-based high throughput confirmation assay for agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A)screeningPrimary screen (HTR2A activators in triplicate)
624380Counterscreen for agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A): Luminescence-based cell-based high throughput screening assay to identify agonists of the mu 1 opioid receptor (OPRM1)screeningCounterscreen (OPRM1 agonists in triplicate)
720642On Hold
720643On Hold
Description:
Source (MLPCN Center Name): The Scripps Research Institute Molecular Screening Center (SRIMSC)
Affiliation: The Scripps Research Institute, TSRI
Assay Provider: Laura Bohn
Network: Molecular Library Probe Production Centers Network (MLPCN)
Grant Proposal Number: DA025158-01A1
Grant Proposal PI: Laura Bohn
External Assay ID: OPRM1_ACT_LUMI_1536_3XEC50 DCSRUN (HTR2A)

Name: Counterscreen for agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A): Luminescence-based cell-based high throughput dose response assay to identify agonists of the mu 1 opioid receptor (OPRM1).

Description:

Serotonin (5-hydroxytryptamine; 5-HT) is an abundant neurotransmitter synthesized from the essential amino acid L-tryptophan and plays a significant role in appetite, platelet aggregation, pain perception, sleep, hormone secretion, sexual behavior, and thermoregulation. Serotonin mediates much of its actions by binding to and activating G protein-coupled receptors (GPCR) on the surface of neurons and other cells. One of these GPCRs, the serotonin 2A receptor (5-HT2AR), is a 7-transmembrane spanning GPCR in the frontal cortex which impacts on development, anxiety, depression, perception, and cognitive function (1, 2). In neurons, the 5-HT2AR is a constitutively internalizing receptor and this trafficking is dependent upon interactions with the regulatory protein, Beta-arrestin2 (3). Studies in cell-based assays reveal that serotonin requires Beta-arrestin2 to internalize the receptors while other agonists, such as DOI, 5-MeO-DMT, and quipazine, internalize the receptor in the absence of Beta-arrestins (3, 4). All 5-HT2AR agonists seem to recruit Beta-arrestin2 to 5-HT2AR in cultured cells. However, while serotonin requires Beta-arrestins to traffic receptors, other agonists such as DOI, 5-MeO-DMT, and quipazine can internalize the receptor in the absence of Beta-arrestins (3, 4). It remains to be determined if the specific 5-HT2AR-Beta-arrestin interactions and trafficking events have physiological significance. It is conceivable that the regulation of 5-HT2AR in vivo may impact neurological sensitivity to serotonin and the responsiveness to pharmacological agents and drugs of abuse. We predict that drugs that disrupt the serotonin 2A receptor-Beta-arrestin interaction might provide a means to alter the sensitivity of the receptor to the levels of serotonin present in the brain(4). These findings may inspire the development of drugs that could be clinically useful for treating depression, schizophrenia, and drug addiction (5-7).

References:

1. Hsieh, C.L., A.M. Bowcock, L.A. Farrer, J.M. Hebert, K.N. Huang, L.L. Cavalli-Sforza, D. Julius, and U. Francke, The serotonin receptor subtype 2 locus HTR2 is on human chromosome 13 near genes for esterase D and retinoblastoma-1 and on mouse chromosome 14. Somat Cell Mol Genet, 1990. 16(6): p. 567-74.
2. Berger, M., J.A. Gray, and B.L. Roth, The expanded biology of serotonin. Annu Rev Med, 2009. 60: p. 355-66.
3. Schmid, C.L., K.M. Raehal, and L.M. Bohn, Agonist-directed signaling of the serotonin 2A receptor depends on beta-arrestin-2 interactions in vivo. Proc Natl Acad Sci U S A, 2008. 105(3): p. 1079-84.
4. Bohn, L.M. and C.L. Schmid, Serotonin receptor signaling and regulation via beta-arrestins. Crit Rev Biochem Mol Biol, 2010. 45(6): p. 555-66.
5. Allen, J.A., P.N. Yadav, and B.L. Roth, Insights into the regulation of 5-HT2A serotonin receptors by scaffolding proteins and kinases. Neuropharmacology, 2008. 55(6): p. 961-8.
6. Raehal, K.M. and L.M. Bohn, The role of beta-arrestin2 in the severity of antinociceptive tolerance and physical dependence induced by different opioid pain therapeutics. Neuropharmacology, 2011. 60(1): p. 58-65.
7. Bohn, L.M. and P.H. McDonald, Seeking Ligand Bias: Assessing GPCR Coupling to Beta-Arrestins for Drug Discovery. Drug Discov Today Technol, 2010. 7(1): p. e37-e42.

Keywords:

counterscreen, dose response, titration, DCSRUN, triplicate, opiod, OPRM1, MOR-1, mu, 5HT2AR, 5-HT2AR, Htr2a, HTR2A, 5-HT-2, 5-HT-2A, 5-HT2A receptor, 5-hydroxytryptamine 2 receptor, 5-hydroxytryptamine receptor 2A, serotonin receptor 2A, mouse, Mus musculus, agonist, serotonin, mimetic, ligand, GPCR, receptor, G-protein, Gi/Go, DiscoverRx, PathHunter, complementation, reconstitution, enzyme, beta-gal, beta-galactosidase, luminescence, lumi, cell-based, U2OS, endocytosis, fusion protein, enzyme fragment complementation, EFC, ProLink, activate, activator, activation, mood, depression, anxiety, pain, appetite, schizophrenia, HTS, high throughput screen, 1536, Scripps, Scripps Florida, MLSMR, The Scripps Research Institute Molecular Screening Center, SRIMSC, Molecular Libraries Probe Production Centers Network, MLPCN.
Protocol
Assay Overview:

The purpose of this assay is to determine whether compounds identified as active in a set of experiments entitled, ""Luminescence-based cell-based high throughput confirmation assay to identify agonists of the mouse 5-hydroxytryptamine (serotonin) receptor 2A (HTR2A)" (AID 624381) activate the mu (OPRM1) opioid receptor or are nonselective activators of beta-arrestin signaling. This assay determines dose response curves.

The assay monitors GPCR-beta-arrestin proximity using low affinity fragment complementation of beta-galactosidase (beta-gal). This assay employs U2OS cells which express OPRM1 fused to a beta-gal peptide fragment (enzyme donor), and beta-arrestin fused to the complementary beta-gal fragment (enzyme acceptor). Cells are incubated with test compound, followed by measurement of well luminescence. As designed, compounds that activate OPRM1 will cause beta-arrestin recruitment, resulting in reconstitution of the beta-gal holoenzyme. The reconstituted holoenzyme can then catalyze the hydrolysis of a substrate (GalactonStarSubstrateTM) which yields a chemiluminescent signal, resulting in increased well luminescence. Compounds are tested in triplicate using a 10-point, 1:3 dilution series starting at a nominal concentration of 93 uM.

Protocol Summary:

The U2OS-OPRM1 (Mu) cell line was routinely cultured in T-175 sq cm flasks at 37 C and 95% relative humidity (RH). The growth media consisted of a 1:1 mixture of Ham's F-12 Nutrient Media (F-12) and Dulbecco's Modified Eagle Media (DMEM) supplemented with 10% v/v heat-inactivated certified fetal bovine serum, 25 mM HEPES, 0.1mM NEAA, 1mM Sodium Pyruvate, 500 ug/mL Geneticin, 250 ug/mL Hygromycin B and 1X antibiotic mix (penicillin, streptomycin, and neomycin).

The day before the assay, 3 uL of cell plating media was dispensed into the first column of 1536 well microtiter plates and 1000 cells in 3 uL of cell plating media were seeded into the remaining wells. Plates were centrifuged and then incubated at 37 C, 5% CO2, and 95 % RH for 24 hours. Next, 28 nL of test compound in DMSO, DAMGO (9.3 uM final concentration) in DMSO, or DMSO alone (0.93% final concentration) were dispensed to the appropriate wells. The plates were then incubated for 3 hours at 37 C, 5% CO2, and 95 % RH. The assay was started by adding 2 uL of PathHunter TM reagent (prepared according to the manufacturer's protocol) to all wells. Plates were centrifuged and after 1 hour of incubation at room temperature, well luminescence was read on a ViewLux microplate reader (Perkin Elmer, Turku, Finland).

The percent activation for each compound was calculated as follows:

%_Activation = ( ( RLU_Test_Compound - Median_RLU_Low_Control ) / ( Median_RLU_High_Control - Median_RLU_Low_Control ) ) * 100

Where:

High_Control is defined as wells containing cells, DAMGO and DMSO.
Test_Compound is defined as wells containing cells, test compounds and DMSO.
Low_Control is defined as wells containing cells and DMSO.

For each test compound, percent activation was plotted against compound concentration. A four parameter equation describing a sigmoidal dose-response curve was then fitted with adjustable baseline using Assay Explorer software (Symyx Technologies Inc). The reported EC50 values were generated from fitted curves by solving for the X-intercept value at the 50% activation level of the Y-intercept value. In cases where the highest concentration tested (i.e. 93 uM) did not result in greater than 50% activation, the EC50 was determined manually as greater than 93 uM.

PubChem Activity Outcome and Score:

Compounds with an EC50 greater than 10 uM were considered inactive. Compounds with an EC50 equal to or less than 10 uM were considered active.

ctivity score was then ranked by the potency of the compounds with fitted curves, with the most potent compounds assigned the highest activity scores.

The PubChem Activity Score range for inactive compounds is 0-0. There are no active compounds.

List of Reagents:

PathHunter U2OS OPRM1 Beta-arrestin cell line (DiscoveRx, part, 93-0213C3)
PathHunter Detection Kit (DiscoveRx, part 93-0001)
PathHunter Cell Plating 5 Reagent (DiscoveRx, part 93-0563R5B)
Agonist: DAMGO (Sigma-Aldrich, part E7384)
Ham's F-12 media (Invitrogen, part 11765-054)
DMEM media (Invitrogen, part 11995-065)
Heat Inactivated Fetal Bovine Serum (Invitrogen, part 10082-147)
Hepes (Invitrogen, part 15630-080)
NEAA (Invitrogen, part 11140-050)
Sodium Pyruvate (Invitrogen, part 11360-070)
Hygromycin B (Invitrogen, part 10687-010)
Geneticin (Invitrogen, part 10131-027)
Penicillin-Streptomycin-Neomycin mix (100X) (Invitrogen, part 15640-055)
Detachin (Genlantis, part T100100)
T-175 tissue culture flasks (Nunc, part 159910)
1536-well plates (Corning, part 7298)
Comment
Due to the increasing size of the MLPCN compound library, this assay may have been run as two or more separate campaigns, each campaign testing a unique set of compounds. All data reported were normalized on a per-plate basis. Possible artifacts of this assay can include, but are not limited to: dust or lint located in or on wells of the microtiter plate, and compounds that modulate well luminescence. All test compound concentrations reported above and below are nominal; the specific test concentration(s) for a particular compound may vary based upon the actual sample provided by the MLSMR. The MLSMR was not able to provide all compounds selected for testing in this assay.
Categorized Comment
Assay: Dictionary: Version: 0.1

Assay: CurveFit [1]: Equation: =( ( [Maximal Response] * [Concentration]^[Hill Slope] ) / ( [Inflection Point Concentration]^[Hill Slope] + [Concentration]^[Hill Slope] ) ) + [Baseline Response]

Assay: CurveFit [1]: Mask: Excluded Points

Result Definitions
Show more
TIDNameDescriptionHistogramTypeUnit
OutcomeThe BioAssay activity outcomeOutcome
1QualifierActivity Qualifier identifies if the resultant data EC50 came from a fitted curve or was determined manually to be less than or greater than its listed EC50 concentration.String
2EC50*The concentration at which 50 percent of the activity in the activator assay is observed; (EC50) shown in micromolar.FloatμM
3LogEC50Log10 of the qualified EC50 (EC50) from the activator assay in M concentrationFloat
4Baseline ResponseAdjustable baseline of the curve fit, minimal response value.Float
5Maximal ResponseThe maximal or asymptotic response above the baseline as concentration increases without bound.Float
6Inflection Point ConcentrationThe concentration value for the inflection point of the curve.FloatμM
7Hill SlopeThe variable HillSlope describes the steepness of the curve. This variable is called the Hill slope, the slope factor, or the Hill coefficient. If it is positive, the curve increases as X increases. If it is negative, the curve decreases as X increases. A standard sigmoid dose-response curve (previous equation) has a Hill Slope of 1.0. When HillSlope is less than 1.0, the curve is more shallow. When HillSlope is greater than 1.0, the curve is steeper. The Hill slope has no units.Float
8Response RangeThe range of Y.Float
9Chi SquareA measure for the 'goodness' of a fit. The chi-square test (Snedecor and Cochran, 1989) is used to test if a sample of data came from a population with a specific distribution.Float
10RsquareThis statistic measures how successful the fit explains the variation of the data; R-square is the square of the correlation between the response values and the predicted response values.Float
11Number of DataPointsOverall number of data points of normalized percent activation that was used for calculations (includes all concentration points); in some cases a data point can be excluded as outlier.Integer
12Excluded PointsFlags to indicate which of the dose-response points were excluded from analysis. (1) means the point was excluded and (0) means the point was not excluded.String
13Activation at 0.005 uM [1] (0.005μM**)Value of % activation at 0.005 uM concentration; replicate [1].Float%
14Activation at 0.005 uM [2] (0.005μM**)Value of % activation at 0.005 uM concentration; replicate [2].Float%
15Activation at 0.005 uM [3] (0.005μM**)Value of % activation at 0.005 uM concentration; replicate [3].Float%
16Activation at 0.014 uM [1] (0.014μM**)Value of % activation at 0.014 uM concentration; replicate [1].Float%
17Activation at 0.014 uM [2] (0.014μM**)Value of % activation at 0.014 uM concentration; replicate [2].Float%
18Activation at 0.014 uM [3] (0.014μM**)Value of % activation at 0.014 uM concentration; replicate [3].Float%
19Activation at 0.042 uM [1] (0.042μM**)Value of % activation at 0.042 uM concentration; replicate [1].Float%
20Activation at 0.042 uM [2] (0.042μM**)Value of % activation at 0.042 uM concentration; replicate [2].Float%
21Activation at 0.042 uM [3] (0.042μM**)Value of % activation at 0.042 uM concentration; replicate [3].Float%
22Activation at 0.127 uM [1] (0.127μM**)Value of % activation at 0.127 uM concentration; replicate [1].Float%
23Activation at 0.127 uM [2] (0.127μM**)Value of % activation at 0.127 uM concentration; replicate [2].Float%
24Activation at 0.127 uM [3] (0.127μM**)Value of % activation at 0.127 uM concentration; replicate [3].Float%
25Activation at 0.380 uM [1] (0.38μM**)Value of % activation at 0.380 uM concentration; replicate [1].Float%
26Activation at 0.380 uM [2] (0.38μM**)Value of % activation at 0.380 uM concentration; replicate [2].Float%
27Activation at 0.380 uM [3] (0.38μM**)Value of % activation at 0.380 uM concentration; replicate [3].Float%
28Activation at 1.1 uM [1] (1.1μM**)Value of % activation at 1.1 uM concentration; replicate [1].Float%
29Activation at 1.1 uM [2] (1.1μM**)Value of % activation at 1.1 uM concentration; replicate [2].Float%
30Activation at 1.1 uM [3] (1.1μM**)Value of % activation at 1.1 uM concentration; replicate [3].Float%
31Activation at 3.4 uM [1] (3.4μM**)Value of % activation at 3.4 uM concentration; replicate [1].Float%
32Activation at 3.4 uM [2] (3.4μM**)Value of % activation at 3.4 uM concentration; replicate [2].Float%
33Activation at 3.4 uM [3] (3.4μM**)Value of % activation at 3.4 uM concentration; replicate [3].Float%
34Activation at 10.3 uM [1] (10.3μM**)Value of % activation at 10.3 uM concentration; replicate [1].Float%
35Activation at 10.3 uM [2] (10.3μM**)Value of % activation at 10.3 uM concentration; replicate [2].Float%
36Activation at 10.3 uM [3] (10.3μM**)Value of % activation at 10.3 uM concentration; replicate [3].Float%
37Activation at 30.8 uM [1] (30.8μM**)Value of % activation at 30.8 uM concentration; replicate [1].Float%
38Activation at 30.8 uM [2] (30.8μM**)Value of % activation at 30.8 uM concentration; replicate [2].Float%
39Activation at 30.8 uM [3] (30.8μM**)Value of % activation at 30.8 uM concentration; replicate [3].Float%
40Activation at 92.4 uM [1] (92.4μM**)Value of % activation at 92.4 uM concentration; replicate [1].Float%
41Activation at 92.4 uM [2] (92.4μM**)Value of % activation at 92.4 uM concentration; replicate [2].Float%
42Activation at 92.4 uM [3] (92.4μM**)Value of % activation at 92.4 uM concentration; replicate [3].Float%

* Activity Concentration. ** Test Concentration.
Additional Information
Grant Number: DA025158-01A1

Data Table (Concise)
PageFrom: