Bookmark and Share
BioAssay: AID 2337

SAR analysis of inhibitors of TNFa specific NF-kB induction revised

Multiple cellular stimuli acting through various pathways lead to NF-kB induction. The assay described below uses tumor necrosis factor alpha (TNFa), a canonical NF-kB inducer, and is designed for identification of hits specific to TNFa-modulated pathways. We utilized this assay to assess selectivity of hits emerging from the primary screening of the library in NOD1- and NOD2-specific assays (AIDs 1578 and 1566). The HEK-293-T NF-kB-Luc cell line designed for luminescent detection of NF-kB induction was utilized in this assay. ..more
_
   
 Tested Compounds
 Tested Compounds
All(285)
 
 
Active(159)
 
 
Inactive(128)
 
 
 Tested Substances
 Tested Substances
All(304)
 
 
Active(166)
 
 
Inactive(138)
 
 
AID: 2337
Data Source: Burnham Center for Chemical Genomics (BCCG-A283-TNF-Alpha-Inhibitor-DryPowder)
BioAssay Type: Confirmatory, Concentration-Response Relationship Observed
Depositor Category: NIH Molecular Libraries Probe Production Network
BioAssay Version:
Deposit Date: 2010-02-04
Hold-until Date: 2010-09-02
Modify Date: 2011-01-13

Data Table ( Complete ):           View Active Data    View All Data
Target
BioActive Compounds: 159
Related Experiments
Show more
AIDNameTypeProbeComment
1566uHTS luminescence assay for the identification of compounds that inhibit NOD2Confirmatory depositor-specified cross reference
1575Summary assay for the identification of compounds that inhibit NOD1Summary2 depositor-specified cross reference: Summary AID.
1578uHTS luminescence assay for the identification of compounds that inhibit NOD1Confirmatory depositor-specified cross reference
1579Summary assay for the identification of compounds that inhibit NOD2Summary depositor-specified cross reference: Summary AID.
1852HTS assay for identification of inhibitors of TNF-a-specific NF-kB inductionOther depositor-specified cross reference
2469SAR analysis of compounds that are cytotoxic to HEK293 - Set 2Confirmatory depositor-specified cross reference
2483SAR analysis of inhibitors of TNFa specific NF-kB induction - Set 2Confirmatory depositor-specified cross reference
2485HTS dose response assay for identification of inhibitors of TNFa-specific NF-kB inductionConfirmatory depositor-specified cross reference
2800SAR analysis of compounds that are cytotoxic to HEK293 - Set 3Confirmatory depositor-specified cross reference
2801SAR analysis of inhibitors of TNFa specific NF-kB induction - Set 3Confirmatory depositor-specified cross reference
1849uHTS Fluorescence assay for the identification of cytotoxic compounds among compounds active in NOD1 cell inhibition assayConfirmatory same project related to Summary assay
2245SAR analysis of tumor necrosis factor alpha (TNF-alpha) induced IL-8 secretion in MCF-7/NOD1 cells.Confirmatory same project related to Summary assay
2250SAR analysis of GM-Tri-DAP induced IL-8 secretion in MCF-7/NOD1 cellsConfirmatory same project related to Summary assay
2255SAR analysis of NF-kB dependent luciferase using Doxorucibin as an inducerConfirmatory same project related to Summary assay
2260SAR analysis of muramyl dipeptide (MDP) induced IL-8 secretion in MCF-7/NOD2 cells.Confirmatory same project related to Summary assay
2261SAR analysis of NF-kB dependent luciferase using PMA/Ionomycin as an inducerConfirmatory same project related to Summary assay
2264SAR analysis of NF-kB dependent luciferase using DAP as an inducerConfirmatory same project related to Summary assay
2333SAR analysis of compounds that inhibit NOD1 revisedConfirmatory same project related to Summary assay
2334SAR analysis of compounds that inhibit NOD2 revisedConfirmatory same project related to Summary assay
2335SAR analysis of compounds that are cytotoxic to HEK293 revisedConfirmatory same project related to Summary assay
2466SAR analysis of compounds that inhibit NOD1 - Set 2Confirmatory same project related to Summary assay
2475SAR analysis of compounds that inhibit NOD2 - Set 2Confirmatory same project related to Summary assay
2503SAR analysis of Muramyl dipeptide (MDP) induced IL-8 secretion in MCF-7/NOD2 cells - Set 2Confirmatory same project related to Summary assay
2504SAR analysis of Tumor necrosis factor alpha (TNF-alpha) induced IL-8 secretion in MCF-7/NOD1 cells - Set 2Confirmatory same project related to Summary assay
2505SAR analysis of GM-Tri-DAP induced IL-8 secretion in MCF-7/NOD1 cells - Set 2Confirmatory same project related to Summary assay
2789SAR analysis of NF-kappaB dependent luciferase using Doxorucibin as an inducer - Set 2Confirmatory same project related to Summary assay
2792SAR analysis of NF-kappaB dependent luciferase using PMA/Ionomycin as an inducer - 2Confirmatory same project related to Summary assay
2793SAR analysis of NF-kappaB dependent luciferase using DAP as an inducer - Set 2Confirmatory same project related to Summary assay
2798SAR analysis of compounds that inhibit NOD1 - Set 3Confirmatory same project related to Summary assay
2799SAR analysis of compounds that inhibit NOD2 - Set 3Confirmatory same project related to Summary assay
1848uHTS Fluorescence assay for the identification of cytotoxic compounds among compounds active in NOD2 cell inhibition assayConfirmatory same project related to Summary assay
2001uHTS luminescence assay for the identification of compounds that inhibit NOD2 in MDP treated cellsConfirmatory same project related to Summary assay
2260SAR analysis of muramyl dipeptide (MDP) induced IL-8 secretion in MCF-7/NOD2 cells.Confirmatory same project related to Summary assay
2264SAR analysis of NF-kB dependent luciferase using DAP as an inducerConfirmatory same project related to Summary assay
2334SAR analysis of compounds that inhibit NOD2 revisedConfirmatory same project related to Summary assay
2335SAR analysis of compounds that are cytotoxic to HEK293 revisedConfirmatory same project related to Summary assay
2475SAR analysis of compounds that inhibit NOD2 - Set 2Confirmatory same project related to Summary assay
2503SAR analysis of Muramyl dipeptide (MDP) induced IL-8 secretion in MCF-7/NOD2 cells - Set 2Confirmatory same project related to Summary assay
2793SAR analysis of NF-kappaB dependent luciferase using DAP as an inducer - Set 2Confirmatory same project related to Summary assay
2799SAR analysis of compounds that inhibit NOD2 - Set 3Confirmatory same project related to Summary assay
Description:
Data Source: Sanford-Burnham Center for Chemical Genomics (SBCCG)
Source Affiliation: Sanford-Burnham Medical Research Institute (SBMRI, San Diego, CA)
Network: NIH Molecular Libraries Production Centers Network (MLPCN)
Grant Number: 1 R03 MH084844-01
Assay Provider: Dr. John C. Reed, Sanford-Burnham Medical Research Institute, San Diego CA

Multiple cellular stimuli acting through various pathways lead to NF-kB induction. The assay described below uses tumor necrosis factor alpha (TNFa), a canonical NF-kB inducer, and is designed for identification of hits specific to TNFa-modulated pathways. We utilized this assay to assess selectivity of hits emerging from the primary screening of the library in NOD1- and NOD2-specific assays (AIDs 1578 and 1566). The HEK-293-T NF-kB-Luc cell line designed for luminescent detection of NF-kB induction was utilized in this assay.

This dose response assay is developed and performed to confirm hits originally identified in "uHTS luminescence assay for the identification of compounds that inhibit NOD2" (AID 1566) and "uHTS luminescence assay for the identification of compounds that inhibit NOD1" (AID 1578) and to study the structure-activity relationship on analogs of the confirmed hits. Compounds are either acquired from commercial sources or synthesized internally.

This assay could be multiplexed with the HEK-293-T cytotoxicity assay, AID 2056.
Protocol
Assay materials:
1) HEK-293-T NF-kB-Luc cell line obtained from the assay provider's laboratory.
2) RNDsystems (Cat # 210-TA-010/CF)
3) SteadyGlo (Promega)
TNF-a NF-kB induction assay: Dose Response
Day 1 Procedure
1) Harvest HEK-293-T NF-kB-Luc at 100% confluency at 100% confluency
2) Supplement NOD plating media with DMSO to a final concentration of 0.62% DMSO
3) Dispense 3 uL (6000 cells)/well to every well of a 1536 TC-treated white plate (Corning # 3727).
4) Spin down plates at 500 rpm for 5 min in an Eppendorf 5810 centrifuge.
5) Serial compound dilutions: dispense with Labcyte Echo 550 50nl total volume 100% DMSO
6) Add 2 ul/well 0.25ng/mL dH20 TNF-a to wells in columns 3-48 using Multidrop.
7) Lid Plates. Sandwich 4 plates between 2 lidded 384 plates filled with H2O
8) Wrap plates securely in single layer of Plastic Wrap (Saran Wrap PVDC version).
9) Incubate overnight (14 hours) in 37 oC 5% CO2 incubator
Day 2 Procedure
1) Add 3 ul/well SteadyGlo to each well with Multidrop.
2) Spin plates @ 1000 rpm for 1 minute on Eppendorf 5810
3) Read luminescence on Perkin-Elmer Viewlux
Comment
The compounds were tested in 1 or more concentration ranges.
Range1 0-20 uM
Range2 0-5 uM
For all samples in each range that resolved to an IC50 the results were averaged and reported as IC50_Range. The IC50 results for all of the IC50s were averaged to produce IC50_Mean.
Compounds with an IC50_Mean <= 20 uM are considered to be active in this assay.
To simplify the distinction between the inactives of the primary screen and of the confirmatory screening stage, the Tiered Activity Scoring System was developed and implemented.
Activity Scoring
Activity scoring rules were devised to take into consideration compound efficacy, its potential interference with the assay and the screening stage that the data was obtained. Details of the Scoring System will be published elsewhere. Briefly, the outline of the scoring system is as follows:
1) First tier (0-40 range) is reserved for primary screening data data and is not applicable to this assay.
2) Second tier (41-80 range) is reserved for dose-response confirmation data and is not applicable to this assay.
3) Third tier (81-100 range) is reserved for resynthesized true positives and their analogues
a. Inactive compounds of the confirmatory stage are assigned a score value equal 81.
b. Compounds with an IC50 <= 0.0391 are assigned a score of 92.
c. For the remaining compounds the score is linearly correlated with a compound's inhibitory potency and, in addition, provides a measure of the likelihood that the compound is not an artifact based on the available information.
d. The Hill coefficient is taken as a measure of compound behavior in the assay via an additional scaling factor QC:
QC = 2.6*[exp(-0.5*nH^2) - exp(-1.5*nH^2)]
This empirical factor prorates the likelihood of target-specific compound effect vs. its non-specific behavior in the assay. This factor is based on expectation that a compound with a single mode of action that achieved equilibrium in the TNF-a inhibition assay demonstrates the Hill coefficient value of 1. Compounds deviating from that behavior are penalized proportionally to the degree of their deviation.
e. Summary equation that takes into account the items discussed above is
Score = 82 + 3*(pIC50 - 3)*QC,
where pIC50 is a negative log(10) of the IC50 value expressed in mole/L concentration units. This equation results in the Score values above 50 for compounds that demonstrate high potency and predictable behavior. Compounds that are inactive in the assay or whose concentration-dependent behavior are likely to be an artifact of that assay will generally have lower Score values.
Categorized Comment - additional comments and annotations
From PubChem:
Assay Cell Type: HEK293
From ChEMBL:
Assay Type: Functional
Result Definitions
Show more
TIDNameDescriptionHistogramTypeUnit
OutcomeThe BioAssay activity outcomeOutcome
ScoreThe BioAssay activity ranking scoreInteger
1IC50_Mean_QualifierThis qualifier is to be used with the next TID, IC50_Mean. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
2IC50_Mean*IC50 value determined using sigmoidal dose response equationFloatμM
3IC50_Qualifier_1_Range1This qualifier is to be used with the next TID, IC50_1_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
4IC50_1_Range1IC50 value determined using sigmoidal dose response equationFloatμM
5Std.Err(IC50)_1_Range1Standard Error of IC50 valueFloatμM
6nH_1_Range1Hill coefficient determined using sigmoidal dose response equationFloat
7Excluded_Points_first_point_Range1Flags to indicate which of the first dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
8% inhibition at 20 uM_first_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
9% inhibition at 10 uM_first_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
10% inhibition at 5 uM_first_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
11% inhibition at 2.5 uM_first_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
12% inhibition at 1.25 uM_first_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
13% inhibition at 0.625 uM_first_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
14% inhibition at 0.3125 uM_first_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
15% inhibition at 0.15625 uM_first_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
16% inhibition at 0.078125 uM_first_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
17% inhibition at 0.0390625 uM_first_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
18Excluded_Points_second_point_Range1Flags to indicate which of the second dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
19% inhibition at 20 uM_second_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
20% inhibition at 10 uM_second_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
21% inhibition at 5 uM_second_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
22% inhibition at 2.5 uM_second_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
23% inhibition at 1.25 uM_second_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
24% inhibition at 0.625 uM_second_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
25% inhibition at 0.3125 uM_second_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
26% inhibition at 0.15625 uM_second_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
27% inhibition at 0.078125 uM_second_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
28% inhibition at 0.0390625 uM_second_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
29IC50_Qualifier_2_Range1This qualifier is to be used with the next TID, IC50_2_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
30IC50_2_Range1IC50 value determined using sigmoidal dose response equationFloatμM
31Std.Err(IC50)_2_Range1Standard Error of IC50 valueFloatμM
32nH_2_Range1Hill coefficient determined using sigmoidal dose response equationFloat
33Excluded_Points_third_point_Range1Flags to indicate which of the third dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
34% inhibition at 20 uM_third_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
35% inhibition at 10 uM_third_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
36% inhibition at 5 uM_third_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
37% inhibition at 2.5 uM_third_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
38% inhibition at 1.25 uM_third_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
39% inhibition at 0.625 uM_third_point_Range1 (0.6125μM**)% inhibition at a given concentrationFloat%
40% inhibition at 0.3125 uM_third_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
41% inhibition at 0.15625 uM_third_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
42% inhibition at 0.078125 uM_third_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
43% inhibition at 0.0390625 uM_third_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
44Excluded_Points_fourth_point_Range1Flags to indicate which of the fourth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
45% inhibition at 20 uM_fourth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
46% inhibition at 10 uM_fourth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
47% inhibition at 5 uM_fourth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
48% inhibition at 2.5 uM_fourth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
49% inhibition at 1.25 uM_fourth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
50% inhibition at 0.625 uM_fourth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
51% inhibition at 0.3125 uM_fourth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
52% inhibition at 0.15625 uM_fourth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
53% inhibition at 0.078125 uM_fourth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
54% inhibition at 0.0390625 uM_fourth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
55IC50_Qualifier_3_Range1This qualifier is to be used with the next TID, IC50_3_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
56IC50_3_Range1IC50 value determined using sigmoidal dose response equationFloatμM
57Std.Err(IC50)_3_Range1Standard Error of IC50 valueFloatμM
58nH_3_Range1Hill coefficient determined using sigmoidal dose response equationFloat
59Excluded_Points_fifth_point_Range1Flags to indicate which of the fifth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
60% inhibition at 20 uM_fifth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
61% inhibition at 10 uM_fifth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
62% inhibition at 5 uM_fifth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
63% inhibition at 2.5 uM_fifth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
64% inhibition at 1.25 uM_fifth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
65% inhibition at 0.625 uM_fifth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
66% inhibition at 0.3125 uM_fifth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
67% inhibition at 0.15625 uM_fifth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
68% inhibition at 0.078125 uM_fifth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
69% inhibition at 0.0390625 uM_fifth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
70Excluded_Points_sixth_point_Range1Flags to indicate which of the sixth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
71% inhibition at 20 uM_sixth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
72% inhibition at 10 uM_sixth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
73% inhibition at 5 uM_sixth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
74% inhibition at 2.5 uM_sixth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
75% inhibition at 1.25 uM_sixth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
76% inhibition at 0.625 uM_sixth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
77% inhibition at 0.3125 uM_sixth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
78% inhibition at 0.15625 uM_sixth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
79% inhibition at 0.078125 uM_sixth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
80% inhibition at 0.0390625 uM_sixth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
81IC50_Qualifier_4_Range1This qualifier is to be used with the next TID, IC50_4_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
82IC50_4_Range1IC50 value determined using sigmoidal dose response equationFloatμM
83Std.Err(IC50)_4_Range1Standard Error of IC50 valueFloatμM
84nH_4_Range1Hill coefficient determined using sigmoidal dose response equationFloat
85Excluded_Points_seventh_point_Range1Flags to indicate which of the seventh dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
86% inhibition at 20 uM_seventh_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
87% inhibition at 10 uM_seventh_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
88% inhibition at 5 uM_seventh_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
89% inhibition at 2.5 uM_seventh_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
90% inhibition at 1.25 uM_seventh_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
91% inhibition at 0.625 uM_seventh_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
92% inhibition at 0.3125 uM_seventh_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
93% inhibition at 0.15625 uM_seventh_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
94% inhibition at 0.078125 uM_seventh_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
95% inhibition at 0.0390625 uM_seventh_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
96Excluded_Points_eighth_point_Range1Flags to indicate which of the eighth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
97% inhibition at 20 uM_eighth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
98% inhibition at 10 uM_eighth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
99% inhibition at 5 uM_eighth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
100% inhibition at 2.5 uM_eighth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
101% inhibition at 1.25 uM_eighth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
102% inhibition at 0.625 uM_eighth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
103% inhibition at 0.3125 uM_eighth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
104% inhibition at 0.15625 uM_eighth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
105% inhibition at 0.078125 uM_eighth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
106% inhibition at 0.0390625 uM_eighth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
107IC50_Qualifier_5_Range1This qualifier is to be used with the next TID, IC50_3_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
108IC50_5_Range1IC50 value determined using sigmoidal dose response equationFloatμM
109Std.Err(IC50)_5_Range1Standard Error of IC50 valueFloatμM
110nH_5_Range1Hill coefficient determined using sigmoidal dose response equationFloat
111Excluded_Points_ninth_point_Range1Flags to indicate which of the ninth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
112% inhibition at 20 uM_ninth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
113% inhibition at 10 uM_ninth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
114% inhibition at 5 uM_ninth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
115% inhibition at 2.5 uM_ninth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
116% inhibition at 1.25 uM_ninth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
117% inhibition at 0.625 uM_ninth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
118% inhibition at 0.3125 uM_ninth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
119% inhibition at 0.15625 uM_ninth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
120% inhibition at 0.078125 uM_ninth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
121% inhibition at 0.0390625 uM_ninth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
122Excluded_Points_tenth_point_Range1Flags to indicate which of the tenth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
123% inhibition at 20 uM_tenth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
124% inhibition at 10 uM_tenth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
125% inhibition at 5 uM_tenth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
126% inhibition at 2.5 uM_tenth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
127% inhibition at 1.25 uM_tenth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
128% inhibition at 0.625 uM_tenth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
129% inhibition at 0.3125 uM_tenth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
130% inhibition at 0.15625 uM_tenth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
131% inhibition at 0.078125 uM_tenth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
132% inhibition at 0.0390625 uM_tenth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
133IC50_Qualifier_6_Range1This qualifier is to be used with the next TID, IC50_3_Range1. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
134IC50_6_Range1IC50 value determined using sigmoidal dose response equationFloatμM
135Std.Err(IC50)_6_Range1Standard Error of IC50 valueFloatμM
136nH_6_Range1Hill coefficient determined using sigmoidal dose response equationFloat
137Excluded_Points_eleventh_point_Range1Flags to indicate which of the eleventh dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
138% inhibition at 20 uM_eleventh_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
139% inhibition at 10 uM_eleventh_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
140% inhibition at 5 uM_eleventh_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
141% inhibition at 2.5 uM_eleventh_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
142% inhibition at 1.25 uM_eleventh_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
143% inhibition at 0.625 uM_eleventh_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
144% inhibition at 0.3125 uM_eleventh_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
145% inhibition at 0.15625 uM_eleventh_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
146% inhibition at 0.078125 uM_eleventh_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
147% inhibition at 0.0390625 uM_eleventh_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
148Excluded_Points_twelfth_point_Range1Flags to indicate which of the twelfth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
149% inhibition at 20 uM_twelfth_point_Range1 (20μM**)% inhibition at a given concentrationFloat%
150% inhibition at 10 uM_twelfth_point_Range1 (10μM**)% inhibition at a given concentrationFloat%
151% inhibition at 5 uM_twelfth_point_Range1 (5μM**)% inhibition at a given concentrationFloat%
152% inhibition at 2.5 uM_twelfth_point_Range1 (2.5μM**)% inhibition at a given concentrationFloat%
153% inhibition at 1.25 uM_twelfth_point_Range1 (1.25μM**)% inhibition at a given concentrationFloat%
154% inhibition at 0.625 uM_twelfth_point_Range1 (0.625μM**)% inhibition at a given concentrationFloat%
155% inhibition at 0.3125 uM_twelfth_point_Range1 (0.3125μM**)% inhibition at a given concentrationFloat%
156% inhibition at 0.15625 uM_twelfth_point_Range1 (0.15625μM**)% inhibition at a given concentrationFloat%
157% inhibition at 0.078125 uM_twelfth_point_Range1 (0.078125μM**)% inhibition at a given concentrationFloat%
158% inhibition at 0.0390625 uM_twelfth_point_Range1 (0.0390625μM**)% inhibition at a given concentrationFloat%
159IC50_Qualifier_1_Range2This qualifier is to be used with the next TID, IC50_1_Range2. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
160IC50_1_Range2IC50 value determined using sigmoidal dose response equationFloatμM
161Std.Err(IC50)_1_Range2Standard Error of IC50 valueFloatμM
162nH_1_Range2Hill coefficient determined using sigmoidal dose response equationFloat
163Excluded_Points_first_point_Range2Flags to indicate which of the first dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
164% inhibition at 5 uM_first_point_Range2 (5μM**)% inhibition at a given concentrationFloat%
165% inhibition at 2.5 uM_first_point_Range2 (2.5μM**)% inhibition at a given concentrationFloat%
166% inhibition at 1.25 uM_first_point_Range2 (1.25μM**)% inhibition at a given concentrationFloat%
167% inhibition at 0.625 uM_first_point_Range2 (0.625μM**)% inhibition at a given concentrationFloat%
168% inhibition at 0.3125 uM_first_point_Range2 (0.3125μM**)% inhibition at a given concentrationFloat%
169% inhibition at 0.15625 uM_first_point_Range2 (0.15625μM**)% inhibition at a given concentrationFloat%
170% inhibition at 0.078125 uM_first_point_Range2 (0.078125μM**)% inhibition at a given concentrationFloat%
171% inhibition at 0.0390625 uM_first_point_Range2 (0.0390625μM**)% inhibition at a given concentrationFloat%
172% inhibition at 0.01953125 uM_first_point_Range2 (0.0195312μM**)% inhibition at a given concentrationFloat%
173% inhibition at 0.009765625 uM_first_point_Range2 (0.00976562μM**)% inhibition at a given concentrationFloat%
174Excluded_Points_second_point_Range2Flags to indicate which of the second dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
175% inhibition at 5 uM_second_point_Range2 (5μM**)% inhibition at a given concentrationFloat%
176% inhibition at 2.5 uM_second_point_Range2 (2.5μM**)% inhibition at a given concentrationFloat%
177% inhibition at 1.25 uM_second_point_Range2 (1.25μM**)% inhibition at a given concentrationFloat%
178% inhibition at 0.625 uM_second_point_Range2 (0.625μM**)% inhibition at a given concentrationFloat%
179% inhibition at 0.3125 uM_second_point_Range2 (0.3125μM**)% inhibition at a given concentrationFloat%
180% inhibition at 0.15625 uM_second_point_Range2 (0.15625μM**)% inhibition at a given concentrationFloat%
181% inhibition at 0.078125 uM_second_point_Range2 (0.078125μM**)% inhibition at a given concentrationFloat%
182% inhibition at 0.0390625 uM_second_point_Range2 (0.0390625μM**)% inhibition at a given concentrationFloat%
183% inhibition at 0.01953125 uM_second_point_Range2 (0.0195312μM**)% inhibition at a given concentrationFloat%
184% inhibition at 0.009765625 uM_second_point_Range2 (0.00976562μM**)% inhibition at a given concentrationFloat%
185IC50_Qualifier_2_Range2This qualifier is to be used with the next TID, IC50_2_Range2. If the qualifier is "=", the IC50 result equals the value in that column; if the qualifier is ">", the IC50 result is greater than that value.String
186IC50_2_Range2IC50 value determined using sigmoidal dose response equationFloatμM
187Std.Err(IC50)_2_Range2Standard Error of IC50 valueFloatμM
188nH_2_Range2Hill coefficient determined using sigmoidal dose response equationFloat
189Excluded_Points_third_point_Range2Flags to indicate which of the third dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
190% inhibition at 5 uM_third_point_Range2 (5μM**)% inhibition at a given concentrationFloat%
191% inhibition at 2.5 uM_third_point_Range2 (2.5μM**)% inhibition at a given concentrationFloat%
192% inhibition at 1.25 uM_third_point_Range2 (1.25μM**)% inhibition at a given concentrationFloat%
193% inhibition at 0.625 uM_third_point_Range2 (0.625μM**)% inhibition at a given concentrationFloat%
194% inhibition at 0.3125 uM_third_point_Range2 (0.3125μM**)% inhibition at a given concentrationFloat%
195% inhibition at 0.15625 uM_third_point_Range2 (0.15625μM**)% inhibition at a given concentrationFloat%
196% inhibition at 0.078125 uM_third_point_Range2 (0.078125μM**)% inhibition at a given concentrationFloat%
197% inhibition at 0.0390625 uM_third_point_Range2 (0.0390625μM**)% inhibition at a given concentrationFloat%
198% inhibition at 0.01953125 uM_third_point_Range2 (0.0195312μM**)% inhibition at a given concentrationFloat%
199% inhibition at 0.009765625 uM_third_point_Range2 (0.00976562μM**)% inhibition at a given concentrationFloat%
200Excluded_Points_fourth_point_Range2Flags to indicate which of the fourth dose-response points were excluded from analysis. (1) means the titration point was (1) excluded and (0) means the point was not excluded, for the titration series going from low to high compound concentrations.String
201% inhibition at 5 uM_fourth_point_Range2 (5μM**)% inhibition at a given concentrationFloat%
202% inhibition at 2.5 uM_fourth_point_Range2 (2.5μM**)% inhibition at a given concentrationFloat%
203% inhibition at 1.25 uM_fourth_point_Range2 (1.25μM**)% inhibition at a given concentrationFloat%
204% inhibition at 0.625 uM_fourth_point_Range2 (0.625μM**)% inhibition at a given concentrationFloat%
205% inhibition at 0.3125 uM_fourth_point_Range2 (0.3125μM**)% inhibition at a given concentrationFloat%
206% inhibition at 0.15625 uM_fourth_point_Range2 (0.15625μM**)% inhibition at a given concentrationFloat%
207% inhibition at 0.078125 uM_fourth_point_Range2 (0.078125μM**)% inhibition at a given concentrationFloat%
208% inhibition at 0.0390625 uM_fourth_point_Range2 (0.0390625μM**)% inhibition at a given concentrationFloat%
209% inhibition at 0.01953125 uM_fourth_point_Range2 (0.0195312μM**)% inhibition at a given concentrationFloat%
210% inhibition at 0.009765625 uM_fourth_point_Range2 (0.00976562μM**)% inhibition at a given concentrationFloat%

* Activity Concentration. ** Test Concentration.
Additional Information
Grant Number: 1 R03 MH084844-01

Data Table (Concise)
Data Table ( Complete ):     View Active Data    View All Data
PageFrom: